您的位置: 标准下载 » 国际标准 » BS 英国标准 »

BS EN 12094-11-2003 固定消防系统.气体灭火系统元件.机械称重设备的试验方法和要求

作者:标准资料网 时间:2024-05-29 18:39:33  浏览:9108   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:Fixedfirefightingsystems-Componentsforgasextinguishingsystems-Requirementsandtestmethodsformechanicalweighingdevices
【原文标准名称】:固定消防系统.气体灭火系统元件.机械称重设备的试验方法和要求
【标准号】:BSEN12094-11-2003
【标准状态】:现行
【国别】:英国
【发布日期】:2003-07-01
【实施或试行日期】:2003-07-01
【发布单位】:英国标准学会(BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:元部件;内装式灭火器;灭火器具;监督(认可);消防队;气体的;灭火剂;灭火设备;灭火设备;定义;称重设备;消防设备;消防;气体;试验;固定的;灭火器;火灾警报;二氧化碳;自动控制系统;规范(验收);防火安全
【英文主题词】:Automaticcontrolsystems;Carbondioxide;Components;Definition;Definitions;Extinguishingagents;Extinguishingequipment;Firealarms;Firebrigade;Fireextinguishers;Fireextinguishers(built-in);Fireextinguishingapparatus;Fireextinguishingequipment;Firesafety;Firefighting;Firefightingequipment;Gaseous;Gases;Specification(approval);Stationary;Surveillance(approval);Testing;Weighingequipment
【摘要】:ThisEuropeanStandardspecifiesrequirementsandtestmethodsformechanicalweighingdevicesforcontinuousmonitoringofcontainersofCO2-,InertGas-orHalocarbonGas-FireExtinguishingInstallations.ThisEuropeanStandarddoesnotcoverweighingdevicesfornon-transportablecontainerswhicharefilledandrefilledonsite,e.g.CO2-low-pressurecontainers.
【中国标准分类号】:C84
【国际标准分类号】:13_220_20
【页数】:22P.;A4
【正文语种】:英语


下载地址: 点击此处下载
基本信息
标准名称:五氧化二钒化学分析方法 高锰酸钾氧化-硫酸亚铁铵滴定法测定五氧化二钒量
英文名称:Methods for chemical analysis of vanadium pentoxide The potassium permanganate oxidation-ammonium ferrous sulfate titrimetric method for the determination of vanadium pentoxide content
中标分类: 冶金 >> 金属化学分析方法 >> 钢铁与铁合金分析方法
ICS分类: 化工技术 >> 无机化学 >> 氧化物
替代情况:原标准号GB/T 7315.1-1987;被YB/T 5328--2009代替
发布日期:2006-07-27
实施日期:2006-10-11
首发日期:
作废日期:2010-06-01
出版社:冶金工业出版社
出版日期:2006-10-11
页数:3页
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 冶金 金属化学分析方法 钢铁与铁合金分析方法 化工技术 无机化学 氧化物
Product Code:SAE J2551
Title:Recommended Practices for Fluid Conductor Carbon and Alloy Steel Tubing Applications
Issuing Committee:Metallic Tubing Committee
Scope:These recommended practices provide general recommendations for designing and fabricating metallic tubes and tube assemblies for fluid power applications utilizing commonly available manufacturing methods and general guidelines for tube selection and application. These documents are primarily intended for mobile/stationary industrial equipment and automotive applications. Aircraft and Aerospace applications were not considered during the preparation of this document.